Z200 PV Analyzer
User Manual
6.1
Settings
Before starting the actual measurements, it is advised to enter information about the site you
are working on. This information will be transferred to the PDF report template found in some
other applications e.g. ”Ground Fault”. The test results from the various measurements, can
be transferred into individual PDF reports, which in turn can be downloaded to your preferred
device, for documentation purposes.
APPLICATION.
Settings is used to enter basic information about your
company, name of technician, the site you are working
on, and other relevant information for documentation
purposes.
The information entered will go in the PDF
report generated by the instrument.
Select
Settings
in the main menu.
Type in your company name, name
of technician and site/location. For
each measurement report, you
have the choice of adding addi-
tional information that might be
helpful in the subsequent analysis
of your results.
When the entry
is complete, just press
Save
. The
entered data is then included in
the reports made from the various
measurements.
15