P21
6. TERMS OF THE WARRANTY
The pump does not
come on
Insufficient power supply
Check whether the pump plate data
corresponds to that of the electricity network.
As original purchaser of this equipment have purchased from Emaux Water Technology Co Ltd,
through Authorized International Distributor or Dealer, warrants its products free from defects in
materials and workmanship under normal use during warranty period. The warranty period begins on
the day of purchase and extends only to the original purchaser. It is not transferable to anyone who
subsequently purchases the product from you. It excludes all expendable parts.
During the warranty period, Emaux authorized reseller will repair or replace defective parts with new
parts or, at the option of Emaux, ser viceable used parts that are equivalent or superior to new parts in
performance.
This Limited Warranty extends only to products purchased from Emaux authorized reseller. This
Limited Warranty does not extend to any product that has been damaged or rendered defective
(a) as a result of accident, misuse or abuse;
(b) as a result of an act of God;
(c) by operation outside the usage parameters stated herein;
(d) by the use of parts not manufactured or sold by Emaux;
(e) by modification of the product;
(f) as a result of war or terrorist attack ; or
(g) as a result of ser vice by anyone other than Emaux authorized reseller or authorized agent.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, EMAUX MAKES NO OTHER WARRANTIES
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. EMAUX EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED
IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE
LIMITED TO THE TERMS OF THIS EXPRESS LIMITED WARRANTY.
Broken diaphragm
Excessive backpressure
Operation without liquid
Membrane not secured
correctly
Check the system pressure. Check whether
the injection valve is blocked. Check whether
there are any blockages between the deliver y
valves and the injection point.
Check the presence of the foot filter (valve). Use a
level probe that stops the pump when the chemical
product in the tank has run out.
If the membrane has been replaced, make
sure that the same is correctly tightened.
