4.2.2
.
4
Paragraph 4 – Setting the Maximum Flow
Operation
This makes it possible to set the
maximum flow offered by the pump,
and the programmed mode (% or
frequency) is used as the standard unit
of measurement when displaying the
flow. Changes can be made by pressing
the key, then using the
keys to set the new value.
Press
to confirm and return to the
main menu.
4.2.2
.
5
Paragraph 5 – Setting the Alarm relay
Operation
This is used to set the alarm relay in the
absence of an alarm situation, if open
(default) or closed.
Changes can be made by pressing the
key, then using the keys
to set the new value.
Press to confirm and return to the
main menu
4.2.2
.
6
Paragraph 6 – Power On Delay Setting
Allows the user to set a pump activation delay time when turning on the
pump itself. This delay will only take effect if the pump is turned off and
then on again by disconnecting its electrical power supply.
The setting can be disabled (Off - factory default) or else can be set to a
delay time ranging from 1 to 60 minutes.
The alarm and pulse LED indicators will flash while the delay time is in
progress (1 sec ON - 1 sec Off) and the countdown will be shown on the
display in seconds. If the pump is in Stop mode, the LEDs alone will be
flashing. While the time delay is in progress, the function can be
disabled by accessing the menu and setting the time to Off.
Press to access the modification option and use the and
b u ttons to set the desired value. Press
t o confirm and
return to the main menu.
PROG
enter
PROG
Configuration
Configuration
Pump Functions
P100%
enter
P100%
F320s m
/
enter
enter
enter
enter
P13
Programming
Programming
Programming
Operation
PROG
enter
PROG
Configuration
Configuration
Pump Functions
P100%
enter
enter
Alarm
Relay
N.Open
enter
PROG
enter
PROG
Configuration
Configuration
Pump Functions
P100%
Alarm Relay
N.Open
Language
English
enter
Delay
Power
ON
off
