EMAK Efco DSi 30, Operators Instruction Book

Page: 22 / 120

GB
22
8.4 CONSERVAZIONE
At the end of each work session, thoroughly clean the machine of
dust and debris, repair or replace defective parts.
The machine must be stored in a dry place, protected from bad
weather and out of reach of children.
9. SPECIAL MAINTENANCE
Each maintenance operation not included in this manual must be
carried out exclusively by an Authorized Service Center.
Operations performed at unauthorized centers or by unqualified
persons will void all forms of warranty.
10 . DIAGNOSTICS
What to do if…
Source of problem Corrective action
1. When operating the switch, the motor does not start
Battery is missing or fitted
incorrectly
Make sure the battery is properly
inserted
Battery is flat Check the charge status and
recharge the battery
2. The motor stops while working
Battery is missing or fitted
incorrectly
Make sure the battery is properly
inserted
Battery is flat Check the charge status and
recharge the battery
3. Reduced duration of the battery
Conditions of heavy use with
greater current absorption
Optimize usage
4. The battery charger does not recharge the battery (red LED
light on)
Dirty contacts Clean the contacts
5. The battery charger does not recharge the battery (no LED
light on)
No voltage to the battery
charger
Check that the plug is
inserted and that there is
voltage to the power outlet
Defective battery charger Replace with original spare
part