MACHINE CONTROL
ENGLISH
6.1.8 CRUISE CONTROL SWITCH
The cruise control switch is installed in the machine depending on the model.
6.1.9 AUT/MAN
SWITCH
The AUT/MAN (AUTOMATIC-MANUAL) switch is installed in the machine dependending on the model. When set to the "MAN" position, it is disen-
gaged from operation and the mowed mass may accumulate in the discharge tunnel. This is why the "MAN" position is only intended for short-term use at
the end of mowing of very small remainders of area. When it is set to the "AUT" position, the function of mowing is automatically switched off once the
grass collection bin is full.
Position
Grass collection bin is full
Mowing mechanism
AUT
NO
ON
AUT
YES
OFF
MAN
NO
ON
MAN
YES
ON
6.1.10 GRASS COLLECTION BIN EMPTYING SWITCH
The switch of the grass collection bin dumping is installed in the machine depending on the model.
The switch has two positions:
- LIFTING
- LOWERING
The end positions of the bin in the lifted or normal position are secured with a safety clutch.
When lifting or lowering the bin, keep the switch pressed. As soon as the end position is reached,
release the switch immediately
, otherwise the electrical installation can breakdown.
6.1.11 BRAKE
When the brake pedal is fully stepped on, the mowing machine is brought to a stop.
Never use the brake simultaneously with the travel function
– threat of damage to the gearbox.
6.1.12 PARKING LEVER
The parking brake lever has 2 positions. Before shifting the lever into "B" position, step
on the brake pedal. Lock the lever in "B" position by rotating it slightly.
To disengage the parking brake, step on the brake pedal, which causes the the brake lever
latch to be automatically released.
A
OFF
B
ON
6.1.13 TRAVEL PEDAL
It controls the drive of wheels and machine travel speed in both directions.
Forward drive: Step on the pedal slowly with the tip of the footin the "F“ direction.
The speed depends on the degree of stepping down on the pedal and vice versa.
Backward drive: Step on the pedal slowly with the heel in the "R“ direction.
The speed depends on the degree of stepping down on the pedal and vice versa.
As soon as the pedal is released, it automatically returns to the "N“ (neutral)
position and the machine stops. The travel pedal is equipped with a safety switch
which will prevent from starting the engine if the pedal is stepped on.
WARNING !!!
Change in the drive direction is only possible once the machine has stopped.
16
WARNING !!!
Cruise control only worksif the ignition is on. You may switch off cruise control by pressing
on the break pedal or by turning the switch off. Only use cruise control for long and direct travel only.
Before any change in travel direction, switch the cruise control off with the switch.
Summary of Contents for EF105J
Page 11: ...10 TECHNICAL PARAMETERS ENGLISH...
