EMAK EF105J, User Manual

Page: 16 / 30

MACHINE CONTROL ENGLISH
6 . MACHINE CONTROL
6.1 DESCRIPTION AND FUNCTION OF CONTROLS
6.1.1 MOWING MECHANISM SWITCH
The switch of the mowing mechanism switches on the electromagnetic clutch whose pulley transfers the drive from the engine by means of the V-belt to
the pulley of the mowing mechanism. The switch is locked in "OFF" position against unwanted switching on. To switch on, it is necessary to pull
the switch lever out a little and tip it to the "ON" position.
OFF
ON
6.1.2 SWITCH BOX
The key has 3 positions:
OFF
- ignition switched off
ON - ignition switched on
START - engine start
6.1.3 GAS CONTROL LEVER
It controls the engine revolutions.
The individual positions of the lever are, as follows:
MIN Engine idle running
MAX Engine max. revolutions
CHOKE * Engine cold start
* This gas control lever is only provided in machines equipped with BS15, BS17, TE 17 and H 16 engine.
6.1.4 CHOKE
It enables a cold engine to be started. The machines equipped with the BS15, BS17, TE 17 and H 16 engine
are not provided with independent choke.
6.1.5 BUZZER
After the grass collection bin is full, the circuit is closed by means of a flap on the rear plate
of the bin and the buzzer sounds. However, the mowing mechanism drive is not disengaged.
6.1.6 HEADLAMP SWITCH
The headlamps placed in front on the bonnet are turned on and off by a switch positioned
together with other switches by the steering wheel.
6.1.7 ENGINE HOUR METER
The engine hour meter is installed dependending on the machine model.
It is only in operation when the ignition is switched on and the seat switch
is switched on (automatically by the weight of the operator).
Any manipulation with the engine hour meter means the loss of guarantee.
If a failure of the meter occurs, inform your service immediately.
15