background image

3 - 8

VC31 Mainboard Manual

Memory Hole At 15M-16M

When set at Enabled, the memory hole at 15MB address will be relocated

to the 15M-16MB address range of the ISA or PCI cycle when the CPU

accesses the 15M-16MB address area. When set at Disabled, the memory

hole at 15MB address will be treated as a DRAM cycle when the CPU

accesses the 15M-16MB address area. The options are: Disabled, Enabled.

DRAM Data Integrity Mode

The feature allows you to set the DRAM data integrity mode.

The options are: Non-ECC, ECC.

Memory Frequency For

This feature allows users to set the memory frequency.

The options are: PC100, PC133, Auto.

Dram Read Thermal Mgmt

The feature allows users to set the DRAM Read Thermal Management

register which in the chip of Intel 845 for the trade-off between system

temperature and its performance. The options are: 3, 2.

System BIOS Cacheable

Setting at Enabled will allow the caching of the BIOS ROM F0000H-FFFFFH,

resulting in better system performance. It may cause system error when

some programd try to access the memory area.

The options are: Disabled, Enabled.

Video BIOS Cacheable

Setting at Enabled will allow the caching of the video BIOS ROM at C0000H-

C7FFFH, resulting in better video performance. It may cause system error

when some programd try to access the memory area.

The options are: Disabled, Enabled.

Video RAM Cacheable

Setting at Enabled will allow the caching of the video RAM at A0000H-

BFFFFH, resulting in better video performance. It may cause system error

when some programd try to access the memory area.

The options are: Disabled, Enabled.

Summary of Contents for VC31





















































Reviews: