3 - 16
VC31 Mainboard Manual
Wake Up On LAN
When set at Enabled, an input signal comes from the other client/server on
the LAN awakes the system from a soft off state if connected over LAN.
The options are Disabled, Enabled.
Wake-Up by PCI card
When set at Enabled, any PCI-PM event awakes the system from a PCI-
PM controlled state. The options are Disabled, Enabled.
Power On by Ring
An incoming call via modem awakes the system from its soft-off mode.
The options are Disabled, Enabled.
CPU Thermal-Throttling
When thermal override condition occur, this item allows users to deter-
mine the duty cycle of the throttling.
The options are: 12.5%, 25.0%, 37.5%, 50.0%, 62.5, 75.0%, 87.5%.
Resume by Alarm
This feature allows you to set the when the system being turned on from
the system power-off status.
The options are: Enabled (Default), Disabled.
Date (of Month)
This feature allows you to set the day of the alarm starts when the RTC
Alarm Resume From Soft Off is set to be Enabled. The options are: 0, 1..31.
Soft-Off by PWR-BTTN
The selection Delay 4 Sec. will allow the system shut down after 4 seconds
after the power button is pressed. The selection Instant-Off will allow the
system shut down immediately once the power button is pressed.
The settings are: Delay 4 Sec, Instant-Off.
PWRON After PWR-Fail
When the system is shut down owing to the power failure, the system will
not be back to power on by itself. This feature allows you to set the
system back to which power status of the system when the system power
is resumed. The options are Off, On, Former-Sts.
