3 - 13
BIOS Setup
RxD , TxD Polarity Active
This feature is available only if the item, UART 2 Mode, is set at ASKIR or
HPSIR. The feature allows you to select the active signals of the reception
end and the transmission end. This is for technician use only.
The options are: Hi, Lo; Hi, Hi; Lo, Hi; Lo, Lo.
Use IR Pins
Allows you to select IR pin mode.
The options are: IR-Rx2Tx2, RxD2, TxD2.
Parallel Port Mode
Allows you to connect with an advanced printer via the port mode it
supports.
The options are: SPP, EPP, ECP, ECP+EPP.
Onboard Parallel Port
Allows you to select from a given set of parameters if the parallel port uses
the onboard I/O controller.
The options are: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled.
EPP Mode Select
This feature allows you to select the EPP type version.
The options are: EPP1.7, EPP1.9.
ECP Mode Use DMA
This feature allows you to select Direct Memory Access (DMA) channel if
the ECP mode selected. The options are: 3, 1.
Game Port Address
This feature allows you to select the game port address or disable it.
The options are: 201, 209, Disabled.
Midi Port Address
This feature allows you to select the Midi port address or disable it.
The options are: 330, 300, 290, Disabled.
