3-7
Installing Board Options
The jumpers are small electrical connectors that control various circuits or functions in your
system. Jumpers are small blocks on a circuit board with two or more pins emerging from them.
To change a jumper setting, pull the plug off its pins and carefully fit it down onto the pins
indicated.
The jumper settings in your computer are preset at the factory; however, you can alter the functions
by changing the standard settings:
●
Enable or disable the password function.
●
Clear the CMOS settings.
●
Enable or disable the FDD write protect.
●
Enable or disable the CMOS Setup control.
Changing the Jumpers
NOTE
The jumper settings and their functions are inscribed on the motherboard or label attached in
your system chassis. If you want to see the label, you need to remove the cover of your system.
CAUTION
Do not change the jumpers with the power on. Always turn off the computer and unplug the power
cord from the computer before changing the jumpers.
Summary of Contents for IM845GV
Page 2: ......
