3-6
Installing Board Options
Installing a Memory Module
Follow these steps to install DIMMs:
1. Release the plastic retaining clips at each end of the socket by pressing the clips outward until
they snap open.
2. Orient a DIMM to the socket so the notch in the DIMM connector are aligned with the
crossbars in the socket.
3. Press the DIMM straight down until retaining tabs snap into place around the ends of the
DIMM.
Removing a Memory Module
To remove memory modules, press the retaining clips outward simultaneously until the DIMM
disengages from the socket and then carefully remove the DIMM from the socket.
Retaining clips
Crossbar
Notch
Summary of Contents for IM845GV
Page 2: ......
