Chapter 1
19
Audio Interface
Speakers
Applicable disc formats
•
DVD-ROM:
•
4.7GB (Single Layer)
•
8.5GB (Dual Layer)
•
DVD-R:
•
3.95GB (Ver. 1.0: read only)
•
4.7GB (Ver. 2.0 for Authoring: read
only)
•
4.7GB (Ver. 2.1 for General: read &
write)
•
(DL) 8.5GB (Ver. 3.0)
•
DVD-RW:
•
4.7GB (Ver. 1.2/ Rev 1.0, 2.0, 3.0)
•
DVD-RAM: 1.46GB/side, 4.7GB/side (Ver.
2.2)
•
DVD+R: 4.7GB (Ver. 1.3)
•
(DL) 8.5GB (Ver. 1.1)
•
DVD+RW:
•
4.7GB (Vol.1 Ver.1.3)
•
CD-ROM Mode-1 data disc
•
CD-ROM Mode-2 data disc
•
CD-ROM XA, CD-I, Photo-CD Multi-
Session, Video CD
•
CD-Audio Disc
•
Mixed mode CD-ROM disc (data and
audio)
•
CD-Extra
•
CD-Text
•
CD-R (Conforming to “Orange Book Part
2”: read & write)
•
CD-RW (Conforming to “Orange Book Part
3”: read & write)
DVD Read:
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18),
DVD-Video, DVD-Audio, SACD (Hybrid),
UDF DVD, DVD-R, DVD-R DL, DVD-R 3.95 GB,
DVD-R Authoring, DVD-R Multi-Border,
DVD-RW, DVD+R, DVD+R DL, DVD+R Multi-
Session, DVD+RW, DVD-RAM V1.0, DVDRAM
V2.0 & 2.1 &2.2.
CD Read:
CD-DA, CD-ROM Mode-1, CD-ROM/XA Mode-2
Form-1 and Mode-2 Form-2, CD-i, CD-i
Bridge, Video-CD (MPEG-1), Karaoke CD, Photo-
CD, Enhanced CD, CD Plus, CD Extra, itrax
CD, CD-Text, UDF CD, CD-R, and CD-RW
DVD Write:
DVD Data & Video
CD Read:
CD-DA, CD-ROM Mode-1, CD-ROM/XA Mode-2
Form-1 and Mode-2 Form-2, CD-i, Video-
CD, CD-Text
Loading mechanism
Drawer (Solenoid Open)
Tact SW (Open)
Emergency Release (draw open hole)
Power Requirement
Input Voltage
DC 5 V +/- 5%
Item
Specification
Chipset
ALC272X
Package
48-pin LQFP ‘Green’
Features
High Definition Audio Codec with Dolby Digital Live
Item
Specification
Vendor and Model
Built-In
Dimensions
N/A
Weight
N/A
Nominal Impedance
4Ohm
Power Rating
2W
Output Sound Pressure
Level
N/A
Item
Specification
Summary of Contents for G430 Series
