eMachines G430 Series Service Manual Download | Manualshive

Page: 153 / 198

background image

Chapter 6

143

FRU (Field Replaceable Unit) List

This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of eMachines G630/G430. Refer to
this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).

Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information available on your
regional web or channel. For whatever reasons a part number change is made, it will not be noted on the printed Service
Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFERENT part number code from
those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided by your regional Acer
office to order FRU parts for repair and service of customer machines.

NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or regulations on how to

dispose it properly, or follow the rules set by your regional Acer office on how to return it.

Chapter 6

«
...
151
152
153
154
155
...
»

Summary of Contents for G430 Series







































































































































































































Reviews:

No comments

Related manuals for G430 Series

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 112

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 192

Toughbook CF-T7BWATAAM

Brand: Panasonic Pages: 44

Toughbook CF-F8EWDZZAM

Brand: Panasonic Pages: 20

Toughbook CF-19CHBAXBM

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 40

The Toughbook 52

Brand: Panasonic Pages: 2

Brand: Gateway Pages: 87

Brand: EUROCOM Pages: 102

Brand: Dell Pages: 56

Brand: HP Pages: 28

Compaq 334088-001

Brand: HP Pages: 44

Brand: HP Pages: 41

Brand: HP Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands