eMachines EL1358, Service Manual

Page: 23 / 98

EL1358 Service Guide 15
Power Management Setup
Field Description Value
ACPI Suspend Mode Use this item to define how your system suspends. Default value is
S3 (STR), the suspend mode is suspend to RAM, i.e., the system
shuts down with the exception of a refresh current to the system
memory. S3 (STR)
S1 (POS)
Deep Power Off Mode Enables or disables compliance to the Energy-using Products Lot 6
Directives (EuP Lot 6). Enabled
Disabled
Power On by RTC Alarm Enables or disables the system to wake up from a power-saving
mode when an RTC alarm occurs. Enabled
Disabled
Power On by PCIE Devices Enables or disables the system to wake up from a power-saving
mode when an event occurs on an installed PCI Express device. Enabled
Disabled
Power On by PCI Devices Enables or disables the system to wake up from a power-saving
mode when an event occurs on an installed PCI device. Enabled
Disabled
Power On by Modem Ring Enables or disables the system to wake up from a power-saving
mode when a modem signal is received. network message Enabled
Disabled
Power On by Onboard LAN Enables or disables the system to wake up from a power-saving
mode when the onboard LAN controller received a network
message. Enabled
Disabled
Wake Up by PS/2 KB/
Mouse Enables or disables the system to wake up from a power-saving
mode when a PS/2 keyboard or mouse is used. Enabled
Disabled