EMAC PCM-9340F-0CA1, User Manual

Page: 25 / 118

17 Chapter 2 Connecting Peripherals
2.12.1 100Base-T RJ-45 connector (CN6)
100Base-T connections are made via the on-board RJ-45 connector.
2.12.2 Network boot
The network boot feature is built into the BIOS. It can be enabled or dis-
abled in the chipset setup of the CMOS configuration. Refer to Chapter 3,
“Award BIOS Setup,” for more information.
2.12.3 Ethernet LED and HDD/power LEDs (LED1, LED2)
Ethernet LED (LED1)
LED 1 should be set so that when the cable is connected, the yellow lamp
is activated; and when data is transmitted, the green lamp is activated.
Note polarity on LEDs.
Power and HDD LED (LED2)
LED 2 should be set so when the HDD is accessed, the yellow lamp is
activated; and when the power is on, the green lamp is activated. Polarity
is important on LED lamps.
2.13 Keyboard and PS/2 mouse connector (CN7)
The PCM-9340 board provides a keyboard connector. A 6-pin mini-DIN
connector (CN7) on the card mounting bracket supports singleboard com-
puter applications. The card comes with an adapter to convert from the 6-
pin mini-DIN connector to a standard DIN connector and to a PS/2 mouse
connector.
Table 2.9: Ethernet LED setup
LED Setting
Green lamp Tx
Yellow lamp Link
Table 2.10: HDD/power LED setup
LED Setting
Green lamp Power
Yellow lamp HDD