19
VIMAR group
SL24.W
8 - Updating Firmware:
The control panel is equipped with a USB port that is used to update the control panel Firmware or the Wi-Fi EMC.W
communication module Firmware
Caution:
If the firmware updating procedure is not carried out properly it may damage the control panel or the Wi-Fi communica
-
tion module, make sure not to interrupt the mains power supply during the update.
To perform the Firmware Update, consult the instructions provided with the Firmware
9 - Control panel behaviour when loading settings:
On full uploading of the settings, some parameters are loaded, others maintained and others again are reset.
According to the type of loading, it may be necessary to calibrate the gate travel again.
To know which parameters the control panel loads, which are maintained and which are reset, refer to the table below:
Action
Data
Control panel behaviour
RESET
(control panel reboot)
Fixed counters
No variation
Resettable counters
Motor parameters
Gate travel data
Installer settings
Password
Remote controls
Firmware Updating
Fixed counters
No variation
Resettable counters
Motor parameters
Gate travel data
Installer settings
Password
Remote controls
LOAD MEM
(loading from memory
card)
Fixed counters
No variation
Resettable counters
Motor parameters
Importing data from a MEM.W memory card
Gate travel data
Self-calibration on first manoeuvre
Installer settings
Importing data from a MEM.W memory card
Password
Remote controls
Reset/Import control
panel data from Wi-
Gate app
Fixed counters
No variation
Resettable counters
Motor parameters
Importing data from Wi-Gate app
Gate travel data
Self-calibration on first manoeuvre
Installer settings
Importing data from Wi-Gate app
Password
No variation
Remote controls
LOAD DEF
(loading default values)
Fixed counters
No variation
Resettable counters
Motor parameters
Gate travel data
Travel data reset, new LRNE or LRNA calibration required
Installer settings
Restored to DEFAULT
Password
Remote controls
No variation
ERSA
(deletion of receiver
memory)
Fixed counters
No variation
Resettable counters
Motor parameters
Gate travel data
Installer settings
Password
Remote controls
Complete deletion
EN
