![Elvox 945F Installation And Operation Manual Download Page 24](http://html1.mh-extra.com/html/elvox/945f/945f_installation-and-operation-manual_2398294024.webp)
24
2.3.1.
Flag programming
To modify one of the flag settings (YES / NO) use key
for NO and
for YES. To confirm, press
. For example,
press
and
on the item “green LED ” to display the confirmation
Use the key
to skip all intermediate phases and go to the next group; from flags the system goes to programmable keys,
then to groups, and then from groups to flags
2.3.2.
Programmable keys
To modify the programmable keys, select the item required using
and
, or by pressing one of the keys
...
directly Then press
A list of assignable functions to each key is displayed, seen in the following order by means of the key
, starting from the current value of the pushbutton:
After selecting the function required, press
A specific procedure exists for each function.
20.3.2.1. Not Assigned
No further parameters are required, and therefore the procedure is completed as follows:
For keys P0, P1, P2, P3, P7 and P8 a value other than Not Assigned is then displayed, as if not programmed these have a speci-
fic function.
FUNCTION
DESCRIPTION
The key takes on the default value. For buttons P0, P1, P2, P3, P7 and P8 the
default is a function, indicated in the preceding table.
The button makes an intercommunicating call
The button turns on a specific speech unit
The button turns on one of the relays Type 692R and 69RH
The button turns on the output F1 of the entrance panel in conversation or anyhow
the last one used
The button turns on the output F2 of the entrance panel in conversation or anyhow
the last one used
The button turns on the output F1 of a specific entrance panel
The button turns on the output F2 of a specific entrance panel
The button switches over the ringtone mute function for intercommunicating
calls
The button switches over the ringtone mute function for calls from a speech
unit
2.3.2.2. Intercommunicating
Enter the ID of an interphone / monitor from 1 to 200:
To cancel press
. To confirm, press
.
the display changes as follows, to specify the intercommunicating function:
2.3.2.3. Self-start
Enter a panel ID from 1 to 15: