2.2.19.
Switchboard warning time
Press
to move to the next item in which the user can select to disabled (default) or modify the frequency of the warning
emitted by the switchboard to the MASTER panel that it is connected to the system and operational. This is useful in cases where
potential switchboard faults are to prevented, leading to possible shutdown of the entire system because no interphone/monitor
rings as inhibited by the presumed presence of the switchboard itself. On activation of this setting, the maximum shutdown time
is double the same value.
The warning is disabled by default The switchboard notifies the system that it is operational only when connected or reset:
Use keys
..
to change the time from 2 to 50 minutes:
To cancel press
. To confirm, press
. Acceptance of the command, as in all cases, is shown on the first line of the
display:
If the time is outside the admissible interval, i.e.2-20 minutes, the display shows the error:
18
2.2.18.2 On external mode
By pressing push-button
you can go to the following function through which you can activate or deactivate (default) the call
filter from the monitors / interphones to the switchboard on external mode.
The message displayed corresponds to the current value:
By pressing push-button
the filter is deactivated, by pressing
the filter is activated.
Press push-button
to cancel. Press
to confirm. The command acceptance, the same as for all other commands,
is indicated on the first display line.
