GB
23
Back
When the setup is complete, press the "up" and "down" key to move the cursor to the "Back". Then, click "OK"
button to return to the implementation for the appropriate functions.
3.8 Privacy zone
In the "privacy shield" menu, press the "left" "right" to select "On". At this point the image will open the Privacy
masking. Then, click "OK" to enter "privacy shield" setting sub-menu, you can mask the scope of privacy and
sensitivity settings.
PRIVACY
AREA SEL
1/4
TOP
0-288
DOWN 0-288
LEFT
0-468
RIGHT 0-468
COLOR 0-8
TRANSP 1.00
MOSAIC OFF
RETURN
Region Selection
Select the privacy zone region, and set the related zone, there are four available setting zones.
Up, down, left and right set
Press the "left" and "right" key to set the level and width of the fixed detection zone, the above side is as the
benchmark for the below zone, 0~288 adjustable.
The left side is as the benchmark for the right zone, 0~468 adjustable.
Color selection of the zone.
Set the color of the privacy zone block, 1-8 adjustable.
Transparency:
0-1
Mosaic:
On / Off
Back
When the setup is complete, press the "up" and "down" key to move the cursor to the "Back". Then, click "OK"
button to return to the implementation for the appropriate functions.
3.9 Day/Night
Day/night switching function is mainly for the user to use the camera easily on different occasions. There are 5
modes of day/night:color mode,black and white mode, auto mode,EXT1 mode,EXT2 mode.
Auto Mode
In the "night switch" menu, press the "left" "right" key to select "Auto Mode". Click "OK" to enter "Auto Mode"
submenu, you can set the corresponding parameters.
DAY/NIGHT
BURST
OFF
DELAY CNT
0-255
DAY—NIGHT
0-255
NIGHT—DAY
0-255
RETURN
Back Back
Pulse burst signal: on and off, two options.
Summary of Contents for 5VL4/660
Page 30: ...30 NOTE...
Page 31: ...31 NOTE...