22
GB
3.6 Adaptive Tone Reproduction - WDR
The ATR (Adaptive Tone Reproduction) function provides gradation compensation to improve the contrast of sub-
jects whose gradation has been lost in cases where, for instance, both low-luminance areas and high-luminance
areas exist in the same picture.
ATR - WDR
LUMINANCE LOW
CONTRAST LOW
RETURN
Brightness and contrast values can be chose between the "low, medium, high", User can choose an appro-
priate value to achieve the best image quality.
3.7 Motion Zone Test
In the " Motion Zone Test " menu, press the "left" "right" to select "On". At this point the image will open the mo-
tion detection. Then, click "OK" button to enter the " Motion Zone Test" setting sub-menu, to set the detect
range and sensitivity settings.
MOTION DET
DETECT SENSE 0-127
BLOCK DISP ON
MONITOR AREA ON
AREA SEL
1/4
TOP
0-288
BOTTOM 0-288
LEFT
0-468
RIGHT
0-468
RETURN
Detection sensitivity
Set motion detection sensitivity, the greater the value the higher the sensitivity, 0-127 adjustable.
Block display
There are "open" / "off" / "set" of three options. Select "On", if there is a moving picture, the box icon will be di-
splayed; select "Off" does not appear; select "Settings", you can enter the confirm button to set the hidden re-
gions.
Region Selection
Select motion detection zone, and the set the related zone.
Monitoring Zone
Check whether the relevant region in motion detection, which is a function switch. When it is closed, this zone
does not participate in motion detection.
Up, down, left and right set
Press the "left" and "right" key to set the level and width of the fixed detection zone, the above side is as the
benchmark for the below zone, 0~288 adjustable.
The left side is as the benchmark for the right zone, 0~468 adjustable.
Summary of Contents for 5VL4/660
Page 30: ...30 NOTE...
Page 31: ...31 NOTE...