Elvox 5VL4/660, Installation And Operation Manual

Page: 24 / 32

24 GB
Delay Control
With this setting the camera achieves the delay time of the transferring: color to black/white or black/white to
color. Conversion between the colors is through controlling of the camera’s brightness sensor of the scene.
When the light is at critical time, the camera may switch the modes back and forth between color and
black/white. Setting the delay time function can resolve this problem. When the camera senses the light inten-
sity during this period are in line with the color conversion before the conversion feature, or do not perform.
It is also intended to better protect the camera and allows users to have better image quality.
Day--Night setting
Set the initiate level of the camera’s color/black switch, 0-255 adjustable.
Night—Day setting
Set the end level of the camera’s black/color switch, 0-255 adjustable.
Note: Set the "Day - Night Set" and "Night - Day set" is to prevent the frequent changes in light caused by swit-
ching the camera has been in a state of users. On the choice of the value, do not set to the same value. The same
value will lead to frequent switch under the light intensity changing.
Back
When the setup is complete, press the "up" and "down" key to move the cursor to the "Back". Then click "OK"
button, perform the back function.
(1) Color Mode
In the "night switch" menu, press the "left" "right" key to select "color model". At this point the image color
mode will be enforced.
Users can set this function according to actual needs.
(2) Black/White Mode
In the "night switch" menu, press the "left" "right" key to select "black and white model". At this time, the image
will be enforced as black and white mode. Then, click "OK" button to enter the "black and white mode" sub-
menu, to set the corresponding parameters.
(1) Pulse
Set the pulse switch, the default value: Off.
(2) IR OPTIMIZER: ON/OFF
3.10 NR
In the "noise reduction" menu click "OK" button to enter the "noise reduction" sub-menu, you can set the cor-
responding parameters.
Noise reduction is in the case of very low light reduction caused by low-light point of the picture noise to en-
hance the signal to noise ratio (S / N) and image clarity, and the camera in low light conditions catches clearly
sharpness image, the quality can be guaranteed.
NR
NR MODE Y/C
Y LEVEL 0-15
C LEVEL 0-15
RETURN
B/W
BURST OFF
IR OPTIMIZER
MODE -
LEVEL -
RETURN