77
EN
CCTV
Step 3: In the preset setting tab, while clicking Setting button, a dialog
will pop-up as Fig 4-35:
z
User can control the dome by rotating up, down, left, right and
adjust the rotating speed zoom, focus and iris of the dome;
z
Select the serial number of the preset point. Click
button to
enable the PTZ wiper and click
button to enable the PTZ light. Fig 4-35 Preset Setting
Note
: PTZ must support wiper and light function and these two buttons are just available when selecting PELCOP or PELCOD.
z
Click Save button to save the settings, click
icon to hide the
tool bar, right click to view the toolbar again; click
icon to exit the
current interface.
z
In the preset interface, click OK button to save the setting; click
Exit button to exit the current interface.
Step4: In the Advanced tab, while clicking cruise “Setting” button, a
dialog box will pop-up as Fig 4-36:
Fig 4-36 Cruise Setting
z
Click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup
button to see a dialog box as Fig 4-37:
z
Click Add icon
to set the speed and time of preset point; select a preset point and then click Delete icon
to
delete that preset point; click Modify icon
to modify the setting of a preset point. User can click
icons
to adjust the position of preset point. Click Preview button to preview the cruise line; click OK button to save the setting; click
Exit button to exit the current interface.
z
Select a preset point in the cruise line list box. Click Delete button to delete that cruise line; click Clear all button to clear all
cruise line from the list box; click OK button to save the setting; click Exit button to exit the current interface.
Step5: In the Advanced tab, while clicking track “Setting” button, a dialog box will pop-up as Fig 4-38:
Fig 4-37 Cruise Setting-Modify Cruise Line Fig 4-38 Track Setting
z
User can control the PTZ by rotating up, down, right, left and can adjust the rotating speed and zoom, focus and iris of the
PTZ; click Start Record button and move the PTZ in the required manner to record by the DVR. Click this button again can stop
recording. Click Start track button to play recorded track. Click this button again can stop the playback.
z
Click
icon to hide the tool bar and right click to view the toolbar again. Click
icon to exit the current tab.
Step 6: After the completion of settings, click “Apply” button to save settings.
4.9 Advanced
Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list.
4.9.1
Reset
This would reset the system to factory defaults and reboot the DVR.
4.9.2
Import/Export
User can export the data files into mobile storage devices as backup and can also import specified data files from mobile
storage device to DVR.