103
EN
CCTV
b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings.
Fig 8-1 Fig 8-2
Q9: DVR displays “please wait…”all the time
a.HDD power cable and data cable may not be well connected. Please check the connections for HDD.
b. It is also possible that the DVR was forced to stop because HDD has a bad sector and it may have caused the system to
halt. Check with a good known HDD or try formatting the existing HDD.
Q10: How to input password and numbers in the interface?
Click the password or the input box a small keyboard will pop up. Please select characters to be input (the initial password is
123456), or you can use the digital keys on the front panel, or the digital keys on the remote controller.
Q11: A hard disk is being identified as a new device however it was being used with another DVR of same model.
Should it be formatted prior use?
It is possible to migrate an HDD from one DVR to another provided that the DVRs are of the same model and that the HDD
being migrated would be used as the sole disk in the new DVR. However in cases where the new DVR already contains a
HDD, the migrated disk being installed would have to be formatted. In general migrating disks from one DVR to another is not
recommended.
Q12: What is the minimum configuration required for remote monitoring?
PC Module
Parameters
CPU Intel
Celeron
2.4G
Motherboard Intel
845
HDD 80G
RAM 512M
VGA
NVIDIA GeForce MX440/FX5200
ATIRADEON 7500/X300
OS
Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA
DirectX 9.0
Q13: What is the PC configuration for 16-ch real time viewing of mainstream?
PC Module
Parameters
CPU
Intel Core(TM)2 Duo CPU E4600
Motherboard G31/P31
chip
HDD 80G
RAM 1GB
VGA
GMA3100/NVIDIA GeForce 8400/
ATI RADEON HD3450
OS
Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA
DirectX 9.0
