66
2. Check the IP address and port of the transfer media server in the ECMS/NVMS. The default server port for auto report is 2009. If it is modified, please
go to the transfer media interface to check.
3. Enable the auto report in the ECMS/NVMS when adding a new device. Then self-define the device ID and input the remaining information of the device
in the ECMS/NVMS.
4. Input the above-mentioned server IP, server port and device ID in the server interface.
Then click “Apply” button to save the setting. Now, the ECMS/NVMS system will automatically connect this device.
Fig. 6-4 Network Configuration-Server
6.4 Server
This function is mainly used for connecting ECMS/NVMS. The setting steps are as follows:
1. In the server interface, select “Enable” as shown in the Fig. 6-4.
Fig. 6-5 Network Configuration-NAT
6.5 NAT
1. Go to Main Menu
Setup
Network
NAT interface. Refer to Fig 6-5.
2. Enable NAT and input the NAT Server (The default NAT Server is
www.autonat.com
).
3. Click “Apply” to save the settings.
EN
Summary of Contents for 46540.H16
Page 95: ...93 ...
