56
EN
4.2.3 Mask
If there is something you don‟t want to display in the live image. You can set mask. For a given channel a maximum of three areas can be masked.
To set up mask area:
1. Go to Menu
Setup
Live
Mask interface.
2. Click Setting button to go into live image.
3. Press and drag the left mouse button to set mask area as shown below.
4. Right click to exit the mask setting interface.
5. Click Apply button to save the setting.
To delete mask area
1. Click Setting button in the mask interface.
2. Select a certain masked area and double click to delete that masked area.
3. Then click Apply button to save the setting.
Fig 4-8 Live Configuration-Mask
4.3 Record Configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap.
Before Configuration, please make sure your DVR has been installed with HDD and has completed its initialization.
Fig 4-9 Setting Mask Area
Summary of Contents for 46540.H16
Page 95: ...93 ...
