60
EN
4.4.2 Motion Schedule
This tab allows to set schedule for motion based recording. The setting steps are as follows:
1. Go to Menu
Setup
Schedule
Motion tab.
2. The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 4.4.1 Schedule for details.
Note: The default schedule of motion based recording is 24x7. If you want to activate motion based recording, you must enable motion alarm and
set up schedule for motion alarm (see Chapter 4.5.1 Motion Alarm for more details).
5 Alarm
Alarm settings include sensor alarm, motion alarm, video loss alarm, other alarm and alarm out setting.
5.1
Sensor Alarm
Some models may support this function. Operate the following steps to configure sensor based alarm:
1 - Go to Main Menu
Setup
Alarm
Sensor
Basic tab.
Fig 4-15 Schedule-Week Schedule
2 - Enable channels by checking the checkboxes beside the desired channels.
3 - Set the alarm type according to triggered alarm type. Two options: NO and NC.
4 - Click “Apply” button to save the setting.
5 - Go to Alarm Handling tab. Select hold time.
Summary of Contents for 46540.H16
Page 95: ...93 ...
