The display warns you if the value you enter is out of range.
Enter 0 as the ID to cancel assignment. Press
and
to move between one identity and another. In position 1, press
to move on to the next item in the programming menu.
Press
to skip all intermediate steps and return directly to
the previous item in the programming menu.
5.9.
F2 COMMON
F2 Press
to move to the next item and program what other
F2 actions the interface must notify DigiBus of. In practice the
F2 output of the DigiBus entrance panel downstream can be ac-
tivated either by a direct command or indirectly, if the F2 output
of another ELVOX TWO-WIRE entrance panel (up to a maximum
of four) is activated. This parameter is left blank by default.
Enter a number between 1 and 15.
Press
to cancel. Press
to confirm. As with all com-
mands, implementation is confirmed on the first line of the di-
splay.
The display warns you if the value you enter is out of range.
Press
and
to move between one identity and ano-
ther. In position 1, press
to move on to the next item in
the programming menu. Press
to skip all intermediate
steps and return directly to the previous item in the program-
ming menu.
5.10.
FUNCTION ENABLING/DISABLING
Press
to move to the next item and program how the in-
terface must enable/disable the commands it receives from
each device. You can configure one interface so that they do
not respond to lock release or F1 or F2 commands. You can also
program the interface to command allow activation only by cer-
tain audio or video door entry systems. To minimise the number
of programming steps, if the interface has at least one common
lock release programmed, these menu items act as enabling
functions. If the interface has no common lock release program-
med, these menu items act as disabling functions. The same
applies to the F1 and F2 functions. Since common lock releases
are normally used in sites like residential complexes, the logic is
designed so that programming one common lock release and
enabling only those users on the same staircase requires the
least amount of work.
+ D
+ D
+ D
+ D
+ D
This parameter is left blank by default. The absence of any pro-
gramming is shown by a series of dashes “—----”. Press
and
to change the identities of the monitor or door entry
system. Alternatively enter the number of the monitor or door
entry system, from 1 to 200.
Press
to cancel. Press
to confirm.
Press
to change the programming of the selected audio or
video door entry system, starting from the position of the current
value.
The correspondence between codes and keys is as follows.
PROGRAMMING
CODE
KEY
Lock Se
F1
F1
F2
F2
Pressing the keys alternately toggles the corresponding function
on and off. For example, to add only F1, press
and
(or vice-versa).
Press
to cancel. Press
to confirm. As with all com-
mands, implementation is confirmed on the first line of the di-
splay.
Press
to skip all intermediate steps and return directly to
the previous item in the programming menu.
+ D
8/16
69DM
GB
