5. SOFTWARE CONFIGURATIONS
With the exclusion of the interface’s ID assignment, the 950C programmer is required to perform all other configurations. The pro-
grammer is connected to connector CN4 at the top right of the unit, accessible from outside the cover. As an alternative you can
also use interfaces 692I or 692I/U and SaveProg PC software (Art. 69CD). The following parameters are configurable
:
The keys on the programmer are
arranged as follows.
The
key serves no purpose when the programmer is po-
wered from the bus. There is no auto-shutdown function for the
same reason. Press the
and
keys on the program-
mer to move to the following item in the main menu.
The following screen is displayed while waiting for the response
from the interface:
After a few seconds, the type and version of the interface soft-
ware appear on the programmer display:
When this screen disappears, the first item in the programming
menu is displayed. The programming procedure terminates ei-
ther when timed out or if you press the
key from any of the
main menu items listed below.
+ D
On\Off
(Dis)Abilitazioni
Italiano
(Lingua locale)
Lingua
DIP SWITCH
DEFAULT
VOCE
SUCCESSIVA
VOCE
PRECEDENTE
SOTTO
VOCE
Numero cifre
codifica
Numero iniziale
Numero finale
Numerazione
dispositivi
Numero cicli
suoneria
Serratura
comune
F1
comune
F2
comune
8
Vuoto
Vuoto
Vuota
Vuota
2
Vuota
Vuota
Vuota
200 x
O
204 x
O
4 x
O
4 x
O
4 x
O
+ D
+ D
+ D
+ D
+ D
+ D
+ D
+ D
+ D
+ D
TAB. 2
PARAMETER
NEXT
ITEM
PREVIOUS
ITEM
SUB-
ITEM
Italian (or local
language)
Language
Number of
code digits
Initial number
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Device
numbering
Number of ring
tone cycles
Common lock
release
Final number
Common F2
Common F1
Function ena-
bling/disabling
5.1.
LANGUAGE
The interface can be programmed to display messages in Italian
(or the local or default language) or English. Local languages vary
according to the national market. To select your language, sim-
ply press
for the local language or
for English.
Press
to cancel. Press
to confirm. As with all com-
mands, implementation is confirmed on the first line of the di-
splay.
The display language now changes.
Press
to move on to the next item in the programming
menu.
GB
5/16
69DM
