29
© 2021, Elon Group AB. All rights reserved.
minute display will show
(--).
Countdown starts immediately
when you have set the time. The
display shows the remaining time
and the timer display flashes for 5
seconds.
When the set time has run out, the
hob will beep for 30 seconds and the
timer display will show (--).
Tips:
a) Press (-) or (+) once on the timer to decrease or increase the
time by 1 minute.
b) Press and hold (-) or (+) on the timer to decrease or increase
the time by 10 minutes.
c) If the timer is set to more than 99 minutes it starts again from
0 minutes.
Setting the timer to switch off one or more heat zones
Press or for the heat
zone you want to control with
the timer.
Set the time by pressing the
timer control
Press (-) and (+)
at the same time to stop the
timer; the minute display will
show (--).
Countdown starts immediately
when you have set the
time. The display shows the
remaining time and the timer
display flashes for 5 seconds.
When the timer runs out the heat zone will be switched off
automatically (the display will show H, which means the zone is
still hot).
NOTE!
The red dot next to the power indicator lights up to show
that a zone is selected.
To change the time after the timer has been set, go back to step
1.
Setting the timer to turn more than one cooking zones off
If more than one heat zone is being controlled by the timer,
the timer display will show the shortest time (example: if zone
1 is set to 5 minutes and zone 2 is set to 15 minutes, the timer
display will show 5).
Note!
The red dot next to the power indicator flashes.
When the timer has run out, the heat zone is switched off. The
minute timer will then show the time for the next heat zone and
the dot for that zone will flash.
When the timer runs out, the heat zone will be switched off
automatically.
Note!
The red dot next to the power indicator lights up to show
that a zone is selected.
To change the time after the timer has been set, go back to step
1.
(set to 15
minutes)
(set to 5
minutes)
