eLutions iR1600, Configuration Manual

Page: 70 / 76

IR1600 Modem
elutions.com
64
Configuration
The term configuration defines the hardware components that comprise a subsystem and system. It is a set of conditions or parameters that define the structure of
an item such as the GPS processing and characteristics of the RS-232 interface ports.
Data Services
One of the functions of your iDEN

modem. Data services uses both circuit-switched and packet data transmissions.
DCD
Data Carrier Detect. An acceptable carrier signal received by the modem over the modem line. Also known as Received Line Signal Indicator (RLSI).
DCE
Data Communication Equipment. The equipment that establishes, maintains, and terminates a connection. It converts data into units of sound and vice versa for
communication over telemodem or cellular networks.
Default
A factory preset choice that, under normal circumstances, works best for your system. You can either accept the default or change it.
Differential Capable
A term used to describe a GPS receiver capable of receiving and applying differential GPS corrections.
Differential GPS
A procedure of correcting GPS solutions to achieve improved position accuracy. Differential GPS provides 2 to 5 meter position accuracy. Differential accuracy
is obtained by applying corrections determined by the stationary Differential Reference Station to the GPS data collected by the RPU (receiver processing unit)
on-board the vehicle.
DNS
Domain Name Server. This is what converts names of domains (ex.: www.elutions.com) into IP addresses (ex. : 64.31.159.2). The DNS server that you use is
generally situated with your access provider.
DTE
Data Terminal Equipment. A computer or hand-held device that generates and receives data, and provides functions that control data communications through a
device like the modem.
Dial Up Networking (DUN)
A component in Windows that enables you to connect your computer to a network via modem. If your computer is not connected to a LAN and you want to
connect to the Internet, you need to configure Dial-Up-Networking (DUN) to dial a Point of Presence (POP) and log into your Internet Service Provider (ISP).
Your ISP will need to provide certain information, such as the Gateway address and your computer’s IP address.