WEP-2L. User manual
19
•
•
•
•
•
•
•
•
•
•
•
•
5.4 The «Monitoring» menu
In the
«Monitoring»
menu you can view the current system state.
5.4.1 The «Wi-Fi clients» submenu
The
«Wi-Fi clients»
submenu displays information about the status of connected Wi-Fi clients.
Information on connected clients is not displayed in real time. In order to update the information on the page you
should click the «Update» button.
№
– number of the connected device in the list;
Hostname
– network name of the device;
IP address
– IP address of the connected device;
MAC address
– MAC address of the connected device;
Interface
– interface of WEP-2L communication with the connected device;
Link Capacity
– parameter that reflects the effectiveness of the use of a modulation access point on the
transmission. It is calculated based on the number of packets transmitted on each modulation to the client,
and the reduction factors. The maximum value is 100% (means that all packets are transmitted to the client
at maximum modulation for the maximum nss type supported by the client). The minimum value is 2% (in
the case when the packets are transmitted to the modulation nss1mcs0 for a client with MIMO 3x3
support). The parameter value is calculated for the last 10 s.
Link Quality
– parameter that displays the status of the link to the client, calculated based on the number of
retransmit packets sent to the client. The maximum value is 100% (all transmitted packets were sent on the
first attempt), the minimum value is 0% (no packets were successfully sent to the client). The parameter
value is calculated for the last 10 s.
Link Quality Common
– parameter that displays the status of the link to the client, calculated based on the
number of retransmit packets sent to the client. The maximum value is 100% (all transmitted packets were
sent on the first attempt), the minimum value is 0% (no packets were successfully sent to the client). The
parameter value is calculated for the entire client connection time.
RSSI
– received signal level, dBm;
SNR
– signal/noise ratio, dB;
TxRate
– channel data rate of transmission, Mbps;
RxRate
– channel data rate of receiving, Mbps;
