WB-2P-LR2. User manual
51
•
•
•
•
•
•
5.4.2 The 'Access' submenu
In the 'Access' submenu, you may configure access to the device via web interface, Telnet and SSH.
Access Ports
In this section you may configure TCP ports for the access to the device via HTTP, HTTPS, Telnet, and SSH:
HTTP port
– number of the port for access to the device web interface via
HTTP
, default value is 80;
HTTPS port
– number of the port for access to the device web interface via
HTTPS
(
HTTP
Secure
– secure
connection), default value is 443;
Telnet Port
– number of port for access to WEB intervace via
Telnet
(default is 23);
SSH Port
– number of port for access to WEB intervace via
SSH
(default is 22).
You may use
Telnet
and
SSH
protocols in order to access the command line (Linux console).
Access to Internet service
This section allows or denies access to the device with separate rules for local and external networks (router
mode). For this you need to set the following permissions:
Web:
HTTP
– when selected, the WAN port connection to the device WEB configurator is enabled via HTTP
(insecure connection);
HTTPS
– when selected, the WAN port connection to the device WEB configurator is enabled via HTTPS
(insecure connection).
Telnet:
Telnet
is
a protocol that allows you to establish mechanisms for remote control of the devices. It allows you to
connect to the device via network for configuration and management purposes.
To enable the device access via Telnet protocol, select the corresponding checkbox.