WB-2P-LR2. User manual
11
1.
2.
•
•
•
•
•
•
•
•
LED
LED status
Description
WLAN
– received signal
strength indicator (RSSI)
solid red
the device is connected to a base station. The base
station signal level is more than -98 dBm
solid yellow
the device is connected to a base station. The base
station signal level is more than -80 dBm
solid green
the device is connected to a base station. The base
station signal level is more than -70 dBm
solid green
the device is connected to a base station. The base
station signal level is more than -60 dBm
none of the indicators is
on
the device is not connected to the base station
2.6 Reset to the default settings
There are two ways to reset the device to factory settings:
Using 'Reset' button on the device. When the device is loaded, press and hold 'Reset' button located on the
bottom panel (approximately 10–15 seconds) until 'Power' indicator is flashing orange.
Using PoE injector supplied with the device. When the device is loaded, press and hold 'RST' button of the
injector (approximately 10–15 seconds) until 'Power' indicator of WB-2P-LR2 is flashing orange.
Device will be rebooted automatically. DHCP client will be launched by default. If the address is not received
via DHCP the device will have IP address
—
192.168.1.1,
subnet mask —
255.255.255.0
; User Name/
Password to access via Web interface: admin/password.
2.7 Delivery package
The basic supply package of WB-2P-LR2 includes:
User station WB-2P-LR2;
Mounting kit: 2 clamps for attaching;
PoE injector 24 V;
Patch cord RJ-45, 5e cat. 1.5 m;
Cord for europlug - C13-F-1.8 m;
Sheet with light indication description;
Conformity certificate;
Technical passport.
A bracket with horizontal and vertical adjustment might be included to the supply package upon a request.