WB-2P-LR2. User manual
29
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SSID
– wireless network ID, which is used for base station connection. The maximum name lenght – 32
symbols, the keyboard register is important. The name may consist of digits, latin letters and symbols '-', '_',
'.', '!', ';', '#' and space, although it is forbidden to start with the symbols '!', ';', '#' and space;
Scan Environment
–
click the button to start scanning at the defined range. The list of found access points
will be displayed. The list of access points consists of seven coloumns: access point SSID, security mode,
MAC address, channel, channel bandwidth, frequency, signal level. If you select any access point from the
list, SSID field will be filled automatically, and the corresponding mode will be selected;
802.11 Mode
– operation mode according to the standard:
802.11bg
– maximum rate is up to 54 Mbps;
802.11bgn
– maximum rate is up to 300 Mbps;
802.11n
– maximum rate is up to 300 Mbps.
Channel Bandwidth
– channel bandwidth, on which a Wi-Fi client operates. The parameter may take values
from 5, 10, 20 and 40 MHz. If the base station has 5 or 10 MHz bandwidth, you should select the same
bandwidth on the user station.
Security mode
– select security mode for wireless network:
Off
– encryption of the wireless network is off, low security;
WEP –
WEP encryption. WEP-key should consist of hexadecimal digits and be of 10 or 26 symbols
lenght or it might be a string (a-z, A-Z, 0-9, ~!@#$%^&*()_-+= symbols) with lenght of 5 or 13 symbols.
The mode is hidden in the web interface;
WPA, WPA2
– WPA and WPA2 authentication. The key lenght is from 8 to 63 symbols. Only the
following characters can be used: a-z, A-Z, 0-9, ~!@#$%^&*()_-+=;:|/?.,<>"`' or space. It is
recommended to use WPA and WPA2 encryption modes as the safetest;
WPA-Enterprise,
WPA2-Enterprise
– WPA and WPA2 encryption with client authentication via 802.1x.
Enter username and password as authentication data.
Tx Power (dBm)
– transmitting Wi-Fi signal power adjustment, dBm.
Short Guard Interval
–
support for shortened guard interval. 400 ns interval is used (instead of 800 ns).
Fixed center frequency
– when the flag is checked, all traffic (data and
management packets) will be
transmitted on the specified center channel frequency with a given bandwidth (40 MHz). The function is
proprietary, the transmission is not carried out according to IEEE 802.11 standards, where it is supposed to
use different center frequencies for data and management traffic with 40 MHz bandwidth. When using the
WB-2P-LR2 with WOP-2ac-LR2 devices with enabled fixed center frequency, activation at the subscriber
station is not required, because happens automatically at the moment of connection to the base station.