___________________________________________________________________________________
___________________________________________________________________________________
128 RG-5400 Subscriber router
If
5400
is intended to be used as a 5-port switch—select the 'Bridge' value in the 'Operation mode' field
of the 'Internet' tile. In
'IP address'
field, specify an address that will be used for the device access. Define
subnet mask (default: 255.255.255.0) and default gateway with DNS address if it is required. To save and apply
settings, click
button.
In the
'Bridge'
mode, the gateway will not assign IP addresses automatically using DHCP to devices
connected to the LAN interface.
6.
In the 'VoIP' tile, you may perform quick configuration of the subscriber line for operation via SIP. To do
this, select 'Line' tab with the number of line that should be configured. Select 'Enable' checkbox, enter the
phone number for this line, and login and password for SIP server authorization. To save and apply settings,
click
button.
