4
1.
Introduction
This manual is for users who have purchased an Eltek GenII system
comprising Eltek standard transmitters, standard repeater(s) and an RC250
receiver together with the RxConfig or software.
It assumes that the application is satisfied using this standard equipment and
that a survey has been conducted to ensure that the radio range covers the
site in question within the required margin of safety of performance.
It assumes that the RxConfig software will be used to configure the RC250
and transmitters and that the RepConf software will be used to set up
repeaters if required.
Quick survey methodology is included.
Eltek has made all user instructions, manuals, data sheets and technical notes
available on their website at www.eltekdataloggers.co.uk/support.html.
Details of specific links are provided where applicable and any relevant
information is also reprinted in this manual to assist the user.
A section is included for standard accessories, identifications and use. A
limited number of standard readily available probes and sensors are covered.
07-06-16
