34
12.5
GS41A
Use with a pyranometer:
Connect green wire to “v”, connect red and blue wires to “-”
SKS1110
CMP3
Connect red wire to “v”, connect black(screen) and blue wires to “-”
The GS-41A can be powered from an external
9VDC (+/- 0.1V) supply or supplementary battery
pack (type SP1118) and / or internal batteries.
External power is connected to “+” and “0”.
Not in use
12.6
GS42/42E
Both transmitters provide two voltage/current inputs, A and B.
is a voltage input. (0-100mV / 1V / 10V plus EU scaling configured using
Darca software)
is a current input. (0-20mA or 4-20mA plus EU scaling configured using
Darca software)
If current is used link to .
v
c
v
c -
is the -ve voltage or current input.
The
provides a 5V or 12V sensor supply (the
selected sensor voltage is present only during
transmission or if the sensor supply is enabled in
TxSetup).
is sensor supply output -ve
is sensor supply ve.
The
has the option to be powered from an
external 9VDC regulated supply.
is external supply -ve
is external ve.
GS-42
0
+
GS-42E
0
+
