Eltek GenII RC250, Working Instructions

Page: 36 / 46

36
12.8 GS44/GS44E/GS44H
The provide four inputs, A B C and D. Each is a voltage or current
input (v c -).
is voltage input, is current input. If current is used, link to . is the -ve
voltage or current input.
There is a on Connector 1 and a sensor supply output
or FET switch on Connector 2.
Connector 1: is sensor supply output -ve, is sensor supply ve
Connector 2: is sensor supply output -ve or FET switch, is sensor supply
ve or FET switch
There is an on Connector 1 and a sensor supply
output or FET switch on Connector 2.
Connector 1: is external 9VDC -ve, is external 9VDC +ve
Connector 2: is sensor supply output -ve or FET switch, is sensor supply
ve or FET switch
The provides four voltage inputs, A B C and D.
There is also an external 9VDC supply input on Connector 1 and a sensor
supply output or FET switch on Connector 2.
Connector 1: is external 9VDC -ve, is external 9VDC +ve
Connector 2: is sensor supply -ve or FET switch, is sensor ve or
FET switch
GS-44/44E
v c v c -
sensor supply output
0 +
0 +
external 9VDC supply input
0 +
0 +
GS-44H bipolar single range
0 +
0 +
GS-44
GS-44E
GS-44H[suffix letter]
Connector
12.9 GS44AVE
AVE indicates an averaged value is used at the
point of transmission.
Connector 1
is external 9VDC -ve (e.g MP9U),
is external 9VDC +ve
Connector 2
( is No connection, is No connection)
is a voltage input
is a current input (with V to C for current range)
0
+
0 +
v
c
- is the -ve voltage