Product Manual, Issue 6
CMS200
www.nexo.com
Page 20
For a motion sensor that is not mounted flush with the panel, the diagram shows the minimum
recommended clearances to ensure motion detection. For example, if the motion sensor is mounted
15mm behind the panel, a 30mm diameter aperture is required.
55 mm
30 mm
65 mm
15 mm
The motion sensor head must be fixed using counter sunk screws or bolts with the following characteristics:
`
Head: countersunk, maximum diameter 6.0mm (0.24in)
`
Thread: maximum diameter 4.0mm (0.16in).
The screws must be tightened to a maximum torque of 0.5Nm (0.37lbfft).
Overall dimensions of the motion sensor
Dimensions of the mounting holes
25 mm
41 mm
5.435 mm
48.5 mm
8 mm
36
m
m
14.2 mm
20.5 mm
20.5 mm
10.2 mm
12
.2
m
m
Sample of a mounted motion sensor
