manualshive.com logo in svg

Elson EPS PEX, Manual, Page: 49 / 52

Share
Download
Elson EPS PEX Manual Download Page 49

Warranty

The Elson EPS Crimp Water & Gas Dual Pex Plumbing 

System carries a 25 year product warranty which covers 
product manufacturing faults and defects. This warranty 
only applies under the following requirements:

• The system must have been installed by a licensed 

Plumber / Gasfitter.

• Proof of installation by a licensed Plumber/Gasfitter is 

required.

• Proof of purchase is required.
• Installation must be in accordance with AS/NZS 3500 & 

AS/NZS 5601

• Installation must be in accordance with any other relevant 

and applicable local authority codes which may take 
precedence.

• Installation must be in accordance with established 

installation practices.

• Installation must be in accordance with the jointing 

procedures included in this manual.

• Installation must only ever involve the use of the same 

approved EPS Pipe (watermark certificate WMKA 21274) 
or the approved system of EPS Crimp Gas PEX-AL pipe 
and fittings with license SMKP 21859 and approved 
tooling, Elson EPS Crimp Water & Gas Dual fittings 
(watermark certificate WMKA 21276) and Elson approved 
tooling.

EPS PEX

25 YEARS WARRANTY

    49

99.9% Lead Free 

< 0.1% Pb

EPS PEX

Summary of Contents for EPS PEX





















































Reviews:

No comments