manualshive.com logo in svg

Elson EPS PEX, Manual, Page: 25 / 52

Share
Download
Elson EPS PEX Manual Download Page 25

• Underground Installation must comply with the required 

standard for termination to Metallic risers.

• Underground Installation must comply with the required 

separation standard for Consumer Gas Piping.

• EPS Crimp Gas Fittings must be wrapped and protected 

using suitable and verified processes for all in ground 
installations and corrosive environments.

Proprietary Gas System Identification: 

EPS Crimp Gas PEX-AL Piping system has an identification 
Tag as part of its Product Range and must be permanently 
attached adjacent to the gas meter or LP Gas cylinder to 
identify the system installed on every installation as detailed 
in AS/NZS 5601. Do not attach this signage plate to any gas 
cylinder or other movable object.

Provision for Pipe Reversion:

As detailed in AS/NZS 5601, in certain installations in some 
building types it is mandatory for the installation of reversion 
fittings to allow for Proprietary Gas Piping systems like EPS 
Crimp Gas to be extended or additions made for future 
application. A Reversion Fitting allows for the connection of 
a Proprietary system to be adapted to a standard Thread or 
Copper tube. The EPS Crimp Gas PEX-AL Piping system 
Product Range includes the three variants of Reversion 
fittings as detailed in the standard.

* Elson Lead Free copper alloy products are 99.9% Lead Free and contain less than 0.1% Lead by weight.

  25

EPS 

LEAD FREE*

 

CRIMP

 GAS - Installation Requirements

99.9% Lead Free 

< 0.1% Pb

EPS PEX

Summary of Contents for EPS PEX





















































Reviews:

No comments