21
Setting of parameters
Rain/Wind sensor KNX RW
• Status: 10.06.2021 • Technical changes reserved. Errors reserved.
Logic output sends “two 8 bit objects“:
7.3.2. Linkage inputs of AND logic
do not use
Communication object logic input 1
Communication object logic input 1 inverted
Communication object logic input 2
Communication object logic input 2 inverted
Communication object logic input 3
Communication object logic input 3 inverted
Communication object logic input 4
Communication object logic input 4 inverted
Communication object logic input 5
Communication object logic input 5 inverted
Communication object logic input 6
Communication object logic input 6 inverted
Communication object logic input 7
Communication object logic input 7 inverted
Communication object logic input 8
Communication object logic input 8 inverted
Rain
no rain
Malfunction wind
Malfunction wind inverted
Wind threshold value 1
Wind threshold value 1inverted
Wind threshold value 2
Wind threshold value 2 inverted
Wind threshold value 3
Wind threshold value 3 inverted
Logic output sends
two 8 bit objects
if logic = 1
object A value
0 … 255; 127
if logic = 0
object A value
0 … 255
if logic = 1
object B value
0 … 255; 127
if logic = 0
object B value
0 … 255
Communication objects
AND Logic 1 A and B sends
• in case of the change of logic
• in case of the change of logic to 1
• in case of the change of logic to 0
• in case of the change of logic and
cyclically
• in case of the change of logic to 1 and
cyclically
• in case of the change of logic to 0 and
cyclically
send cyclically every
(only if sending “cyclically”)
5 sec … 2 h