17
Setting of parameters
Rain/Wind sensor KNX RW
• Status: 10.06.2021 • Technical changes reserved. Errors reserved.
7. Setting of parameters
7.1. General settings
Wind force
Measured value
• do not send
• send cyclically
• send on change
• send on change and cyclically
send cyclically every
(only if sending “cyclically”)
5 sec … 2 h
From change in %
(only if sending “on change“)
1 … 50; 20
Send and reset of the maximum wind load
value on request
do not release • release
Use malfunction object
No • Yes