![background image](http://html1.mh-extra.com/html/elsner-elektronik/sewi-knx-l/sewi-knx-l_installation-and-adjustment_2396617020.webp)
18
Parameter setting
Sensor Sewi KNX L
• Version: 10.09.2018 • Technical Changes and Errors excepted.
Set, at which deviation from the setpoint value a
dim command is to be sent
. Spe-
cify the
dimming increment
and the
repetition cycle
for the dim command.
Define, up to which
response value
the dim actuator sends a brighter or darker com-
mand. On the one hand, this defines the range of use for the lamp, on the other hand,
once the minimum or maximum value has been reached, no unnecessary messages
are sent to the bus.
The light regulation can be
interrupted during switching or dimming
by response
objects, i.e. nothing else is transmitted via the dim output. This results in manual light
operation having priority.
Set, which objects will trigger interruption and when the regulation is to be continued.
Object evaluation
• 1 = start | 0 = stop
• 0 = start | 1 = stop
Object value prior to first communication
0 • 1
Reaction to stop
• send nothing
• send off command
• send on command
• send value
Value in %
0...100
Send the dim command, if
• the actual value deviates from the set-
point value by more than X%
• the actual value deviates from the set-
point value by more than X Lux
Target / actual difference in %
(for a deviation in %)
1...100; 20
Target / actual difference in Lux
(for a deviation in Lux)
1...2500; 100
Dimmer increments
100.00% • 50.00% • 25.00% • 12.5% • 6.25% •
3.13% • 1.56%
Repetition of the dim command in seconds
1...600; 6
Dim brighter with response value in %
1...100
Dim darker with response value in %
0...99
Use interruptions
No •
Yes
Interrupt regulation when
Reception from response switching object
No • Yes
Reception from response dimming object
No • Yes
Continue regulation
• after a waiting period
• at object reception after waiting period
• at object reception or after waiting period
Waiting period in seconds
5...72000
(Standard value depending on the
setting of "continue regulation")
Object value
0 • 1 • 0 or 1