![background image](http://html1.mh-extra.com/html/elsner-elektronik/sewi-knx-l/sewi-knx-l_installation-and-adjustment_2396617005.webp)
3
Description
Sensor Sewi KNX L
• Version: 10.09.2018 • Technical Changes and Errors excepted.
1.
Description
The
Sensor Sewi KNX L
for the KNX bus system captures the brightness in the room.
The measurement value can be used for the control of limit-dependent switching out-
puts. States can be linked via AND logic gates and OR logic gates. Multi-function mod-
ules change input data as required by means of calculations, querying a condition, or
converting the data point type.
Functions:
•
Brightness measurement
with
brightness control
•
Threshold values
can be adjusted per parameter or via communication
objects
•
8 AND and 8 OR logic gates
, each with 4 inputs. All switching events as well
as 16 logic inputs in the form of communications objects can be used as inputs
for the logic gates. The output of each gate can be configured optionally as 1-
bit or 2 x 8-bit
•
8 multi-function modules
(computers) for changing the input data by
calculations, by querying a condition or by converting the data point type
Configuration is made using the KNX software ETS. The
product file
can be down-
loaded from the Elsner Elektronik website on
www.elsner-elektronik.de
in the “Ser-
vice” menu.
1.0.1. Scope of delivery
•
Brightness sensor
1.1. Technical data
Housing
Plastic
Colour
White (Cover glossy, skirting matt)
Assembly
Surface, wall or ceiling installation
Protection category
IP 30
Dimensions
Ø approx. 105 mm, height approx. 32 mm
Total weight
approx. 45 g
Ambient temperature
Operation -25…+80°C, storage -25…+85°C
Ambient humidity
max. 95% RH, avoid condensation
Operating voltage
KNX bus voltage
Bus current
max. 10 mA
Data output
KNX +/- bus plug-in terminal
BCU type
Integrated microcontroller
PEI type
0
Group addresses
max. 2000
Assignments
max. 2000
Communication objects
189