elsner elektronik KNX TH65-AP Manual Download Page 2

Page: 2 / 43

Product Description ..........................................................................................3

Technical specifications................................................................................................. 3

Installation and Commissioning ........................................................................5

Installation position ....................................................................................................... 5

Layout of casing and pcb ............................................................................................... 6

Connection of the temperature sensor........................................................................... 6

Notes on installation ............................................................................................................................. 6

Maintenance................................................................................................................... 7

Transmission protocol .......................................................................................7

Abbreviations ................................................................................................................. 7

Listing of all communication objects ............................................................................. 7

Setting of parameters......................................................................................12

General settings ........................................................................................................... 12

Temperature measured value ....................................................................................... 13

Temperature threshold values ...................................................................................... 14

Temperature threshold value 1 / 2 / 3 / 4 ........................................................................................... 15

Temperature PI control ................................................................................................ 17

Humidity measured value ............................................................................................. 24

Humidity threshold value ............................................................................................. 25

Humidity threshold value 1 / 2............................................................................................................ 26

Humidity PI control ...................................................................................................... 29

Dew point temperature ................................................................................................ 32

Cooling medium temperature sensor ........................................................................... 33

Absolute humidity ........................................................................................................ 35

Comfort field................................................................................................................ 36

Logic............................................................................................................................. 37

AND Logic 1 / 2 / 3 / 4 .......................................................................................................................... 38

Linkage inputs of AND logic ............................................................................................................... 39

OR Logic 1 / 2 / 3 / 4 ............................................................................................................................. 40

Linkage inputs of OR logic .................................................................................................................. 41

KNX TH65-AP • from software version 0.2.0, ETS programme version 2.0 • Version: 28.06.2010.
Errors excepted. Subject to technical changes.

Elsner Elektronik GmbH

Steuerungs- und Automatisierungstechnik

Herdweg 7 • D-75391 Gechingen • Germany
Phone: +49 (0) 70 56/93 97-0 • Fax: +49 (0) 70 56/93 97-20

[email protected] • www.elsner-elektronik.de

Summary of Contents for KNX TH65-AP












































Search results

Summary of Contents for KNX TH65-AP

Reviews:

Related manuals for KNX TH65-AP

Brands by name

Popular brands

elsner elektronik KNX TH65-AP, Manual

Search results

Summary of Contents for KNX TH65-AP

Reviews:

Related manuals for KNX TH65-AP

Brands by name

Popular brands