30
If the control is used:
General humidity control:
……………………………
Type of control
• One stage dehumidifcation
• Two-stage dehumidifcation
• Humidification and dehumidification
Behaviour of the blocking object with value
• 1 = block control|
0 = release control
• 0 = block control|
1 = release control
Value of the blocking object
before 1. communication
0 • 1
Controller target value:
……………………………
Target value setpoint per
Parameter • Communication object
If the target value is set per Parameter:
Target value setpoint per
Parameter
Target value in %
0 … 100
Dead zone between humidification and
dehumidification in %
(only if type of control is a humidifacation and
dehumidification)
Humidification starts with
rel. humidity
O
target value - dead zone
0 … 100
If the target value is set per communication object:
Target value setpoint per
Communication object
The value communicated last shall be
maintained
• not
• after restoration of voltage
• after restoration of voltage and programming
(Do not use for first commissioning)
Start target value in %
valid until 1.communication
(only if the value communicated last is “not”
maintained or “after restoration of voltage”)
0 … 100
Type of the target value change
• Absolute value
• Increment/decrement
Step size
(only with “Increment/decrement”)
0.1°C • 0.2°C • 0.3°C • 0.4°C • 0.5°C • 1°C • 2°C •
3°C • 4°C • 5°C
