![background image](http://html.mh-extra.com/html/elsner-elektronik/knx-t-un-130/knx-t-un-130_installation-and-adjustment_2396711007.webp)
5
Installation and commissioning
Temperature Sensor KNX T-UN 130
• Status: 27.01.2020 • Technical changes reserved. Errors reserved.
2.2. Installation position
The evaluation electronics of the sensor is installed in a socket. When selecting an in-
stallation location for the measuring sensor, please ensure that the measurement re-
sults are affected as little as possible by external influences. Possible sources of inter-
ference include:
•
Direct sunlight
•
Drafts from windows and doors
•
Warming or cooling of the building structure on which the sensor is mounted,
e.g. due to sunlight, heating or cold water pipes
•
Connection lines which lead from warmer or colder areas to the sensor
Temperature variations from such sources of interference must be corrected in the ETS
in order to ensure the specified accuracy of the sensor (temperature offset).
2.3. Mounting and connection
2.3.1. Composition of the sensor
1
Slot for KNX te/-
2
Programming LED
3
Programming button for teaching the instrument
4
Connection clamp for measuring sensor
5
Connection cable measuring sensor
6
Sensor tip (measuring sensor)
1
2
4
3
5
6
Summary of Contents for KNX T-UN 130
Page 1: ...EN Installation and Adjustment KNXT UN 130 Temperature Sensor Item number 70220 ...
Page 2: ......
Page 25: ......