![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-b8-th/knx-b8-th_installation-and-adjustment_2396602052.webp)
51
Parameter settings
Interface KNX B8-TH
• Version: 24.08.2016 • Technical changes and errors excepted.
Input to shutter, blinds, awning or window control:
If the input to the drive control is used via the bus, select the bus function "shutter",
"awning", "blinds" or "window" and specify the button function and control mode.
*There is a detailed description of the setting options for the individual control
modes in chapter
Control modes for drive control
Input as dimmer:
If the input is used as a dimmer, select the bus function "Dimmer" and specify the but-
ton function, time interval (switching/dimming) and if requested, the repeat interval for
a long button press.
Command when pressing the pushbutton
do not send telegram
Command when releasing before time
expires
• Switching
• Do not send message
Command when pressing the button
• Switching
• send 0
• send 1
• Do not send telegram
Command when releasing the button
• Switching
• send 0
• send 1
• Do not send telegram
Send behaviour
• on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Cycle
(if sent periodically)
5 sec • 10 sec • 30 sec • 1 min • 2 min • 5 min
• 10 min • 20 min • 30 min • 1 hr • 2 hrs
Function
Shutter / blinds / awning / window
Button function
Up • Down
Up • Down • Up/
Down
On • Off • On/Off
Open • Closed •
Open/Closed
(shutter)
(blinds)
(awning)
(window)
Control mode*
• Standard
• Standard inverted
• Comfort mode
• Dead man's switch
Function
Dimmer
Button function
brighter • darker • brighter/darker