![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-b8-th/knx-b8-th_installation-and-adjustment_2396602053.webp)
52
Parameter settings
Interface KNX B8-TH
• Version: 24.08.2016 • Technical changes and errors excepted.
Input 8 bit encoder:
If the input is to be used as an 8bit encoder, select the "8 bit encoder" bus function.
Specify the range and which value will be sent.
Input 16 bit encoder:
If the input is to be used as a 16bit encoder, select the "16 bit encoder" bus function and
specify which value will be sent.
Input for scenario control:
If scenarios are recalled and stored with the input, select the bus function "Recall/save
scenario" and define the storage, time difference (recall/storage) and the scenario
number.
5.14.2. Control modes for drive control
If inputs are being used as switches to operate shades or windows, then various con-
trol modes can be set.
Time between switching and dimming
(in 0.1 s)
1...50; 5
Repeat the dimm command
no • yes
Repeat the dimm command
for a long button press
(if dimm command is repeated)
every 0.1 s • every 2 sec; every 0,5 sec
Dim by
(if dimm command is repeated)
1,50% • 3% • 6 % • 12,50% • 25% • 50%
Function
8 bit encoder
Range
• 0...255
• 0%...100%
• 0°...360°
Value
[Depends on „Range“]
Function
16 bit encoder
Value in 0.1
-6707600...6707600; 0
Function
Scenarios
Scenario no.
0...63
Scenario function
• Recall
• Recall and save
Press key for longer than (in 01 s)
Scenario saving
(when "and save" is selected)
1...50